Delta OHM HD50 14b7P TC, Operating Manual

Page: 12 / 58

HD50
- 12 -
V1.4
5.1 SETTINGS
MENU
The SETTINGS menu allows viewing the data logger general information and configuring
the Modbus address, the user code, the belonging group, the logging parameters, the
alarms and the units of measurement. It also allows choosing the measurements to be
stored in the internal memory and displayed in real time (Monitor) and in what order.
• INFO panel
Displays the general information of the instrument:
o
model, serial number
o
user code
o
belonging group
o
Wi-Fi signal level (only if the Wi-Fi interface is active)
o
behaviour when the internal memory is full (cyclic overwriting or not)
o
logging status
o
buzzer activation status
o
Modbus address, firmware version
o
logging interval
o
measurement interval
o
calibration date
• CONFIGURATION panel
Setting of Modbus address, user code and belonging group (defining a group is useful
for identifying subsets of devices, for example the devices installed in the same envi-
ronment). Press “
Apply ” to send the changes to the data logger.
Button to refresh
the settings