Delta OHM HD32MT.3, Operating Manual

Page: 50 / 62

HD32MT.3
- 50 -
V1.2
13 STORAGE OF INSTRUMENTS
Storage conditions of the instruments:

Temperature: -25...+65 °C.

Humidity: less than 90 %RH no condensation.

For storage, avoid places where:

There is a high level of humidity;

Instruments are exposed to direct sun radiation;

Instruments are exposed to a high temperature source;

There are strong vibrations;

There is vapor, salt and/or corrosive gases.
14 SAFETY INSTRUCTIONS
General instructions for safety
These instruments have been manufactured and tested in compliance with the safety stand-
ards EN61010-1:2010 for electronic instruments of measure and left the factory in perfect
safety technical conditions.
The regular functioning and operational safety of these instruments can be ensured only if all
normal safety measures, as well as the specific measures described in this manual, are fol-
lowed.
The regular functioning and operational safety of the instruments can only be guaranteed un-
der the climatic conditions specified in the manual.
Do not use the instruments in places where there are:

Rapid ambient temperature variations that may cause condensation.

Corrosive or flammable gases.

Direct vibrations or bumps to the instrument.

High-intensity electromagnetic fields, static electricity.
If instruments are transported from a cold environment to a warm one, or vice versa, the for-
mation of condensation may cause disturbances to their functioning. In this case, wait until the
temperature of the instrument reaches room temperature before putting into operation.
Obligations of the User
The user of the instruments must ensure compliance with the following standards and guide-
lines for the treatment of hazardous materials:

EEC directives on workplace safety

National low regulations on workplace safety

Accident prevention regulations