Delta OHM HD32MT.3 Page 6 Operating Manual Download

Page: 6 / 62

HD32MT.3

- 6 -

V1.2

Besides allowing data logger configuration and stored data download, Meteo Studio software

is able to process downloaded data, present them in table and graphic form, on the desired

time interval. Data can be viewed in different temporal resolutions and can be grouped on a

daily, weekly or monthly basis. The software allows to manage the data coming from several

weather stations.
By connecting the optional HD5110 module (ETHERNET/RS232 adapter) to the data logger,

you can connect to the data logger with the software Meteo Studio via the ETHERNET local

network.

LOUD

The data loggers equipped with the optional GSM/UMTS module can automatically send, at

regular intervals, the data to the Delta OHM portal “www.deltaohm.cloud”. This allows you to

view the data from anywhere in the world, even by using mobile devices (tablet, smartphone,

notebook), simply having an Internet connection and using a web browser.

Summary of Contents for HD32MT.3































































Search results

Summary of Contents for HD32MT.3

Reviews:

Related manuals for HD32MT.3

Brands by name

Popular brands

Delta OHM HD32MT.3, Operating Manual

Search results

Summary of Contents for HD32MT.3

Reviews:

Related manuals for HD32MT.3

Brands by name

Popular brands