Delta Electronics AFE075A23A, User Manual

Page: 79 / 131

Chapter 11 Description of Parameter Settings

AFE2000 Series
11-77
Password Set
Pass word Forgotten
Enter 9 999 and press ENT ER,
repea t this st ep twic e. The
param eter s etting s will rese t to
fac tory s etting .
Pr.01-03 displays
01 when the correct
password is entered
into Pr.01-03.
When the correc t pas sword i s en tered
into Pr.01-02 ,Pr.0 1-03 d ispl ays 00.
Pass word Input
01-03
01-03
01-03
Pr.01-02
Correct Password
Incorrect Password
Pr.01-03
When co rrec t pa ssword
ente re d in to Pr.01-0 2,
Pr.01-03 dis play s 0 0.
Pr.01-02
It a llows three wrong pas sword in puts:
1s t time dis play s " 01" if pas sword is i ncorrec t.
2nd tim e dis play s " 02", if pa ssword is i ncorrec t.
3rd time disp lays "Pc ode"(bl inkin g)
The key pad wi ll be loc ked , when wron g
pas sword i s e ntered for three time s. Ple ase
resta rt the drive and enter the pa ssword agai n.
Source of Operation Command
Factory Setting: 0
Settings 1: External terminal
2: RS-485 serial communication or digital keypad (KPVL-CC01)

For the factory released AFE2000 unit, the digital keypad is not set as the source of operation
command, user can perform operation control via the external terminal or the communication
interface (RS485).

When the PU led on the interface is lightened, the digital keypad can now perform the operation
command. (For optional accessories selection, please refer to Ch 06 Optional Acessories- Digital
keypad section.)
Control Mode Selection
Factory Setting: 0
Settings 0
：
AFE2000 mode
1
：
Regenerate mode
Accel. Time
Factory Setting: 2
Settings 0.00~600.00 sec
Decel. Time
Factory Setting: 2
Settings 0.00~600.00 sec

Acceleration: (The DC Bus voltage measured at stop – the maximum allowable voltage
setting)/Acceleration Time

Deceleration: (The DC Bus voltage measured at stop – the maximum allowable voltage
setting)/Deceleration Time

The maximum allowable voltage setting of the AFE2000 model.