Delta Electronics AFE075A23A, User Manual

Page: 61 / 131

Chapter 9 Digital Keypad

AFE2000 Series
9-59
Chapter 9 Digital Keypad
KPC-CC01(Optional) KPC-CE01
F: Fre que ncy C omma nd
H: Outp ut Frequ ency
U: User De fine d Uni ts
ERR: CAN Erro r Ind icator
RU N: CAN Ru n Indi ca tor
B
: Status Indi cator
A
: LED Disp lay
D ispla y freq uen cy, cu rre nt, vo ltag e and erro r etc.
C
: Func tion
(Re fer to the chart foll ow s for deta il de scripti on )
Communication interface
：
RJ-45 (socket), RS-485 interface
Installation Method:
 Embedded mounting. Flat installation to the control box surface and the front facet is water proof.
 Other optional accessories model: MKC-KPPK with protection level IP56 can be installed by flang mounting or
embedded mounting.
Descriptions of Keypad Functions
Key Descriptions
Starts Operation
1. It is only valid when the source of operation command is from the keypad.
2. It can operate the AFE2000 by the function setting and the RUN LED will be ON.
3. It can be pressed again and again at stop process.
Stop Command Key. This key has the highest processing priority in any situation.
1. When it receives STOP command, no matter the AC motor drive is in operation or stop
status, the AC motor drive needs to execute “STOP” command.
2. The RESET key can be used to reset the drive after the fault occurs. For those faults that
can’t be reset by the RESET key, see the fault records after pressing MENU key for
details.
(This function is not supported.)
ENTER Key
Press ENTER and go to the next level. If it is the last level then press ENTER to execute the command.
ESC Key
ESC key function is to leave current menu and return to the last menu. It is also functioned as
a return key in the sub-menu.
Press MENU to return to the main menu page.
MENU content:
(KPC-CE01 does not support function 4~12; KPC-CC01 does not support function 4,5,7.)
1. Detail Parameter
2. Copy Parameter
3. Keypad Locked
5. Copy PLC
6.
Fault Record
7. Quick/Simple Setup
9. Time Setup
10. Language Setup
11. Startup Menu