22
Protocol Name
Messages
Start walking slowly.
Protocol Status
Progress Indicator
Sensor Status
Task List
Task Info
Figure 18:
Running a Test protocol. Left) checking available re-
sources. Right) Test status feedback.
During data collection, press softkey 3 (“Sensors”) to view the sensor
status, including signal strength, battery lifetime, and an indication
of which sensors are being logged. Pressing softkey 3 again (“Return”)
will bring back the test status screen.
Status Connection
Logging Data
Battery Charge
Channel No.
Signal Strength
Figure 19:
Checking the individual sensor status using the console.
When all tasks are finished, a “Test Complete” message will display.
Pressing Softkey 3 (“Exit”) will bring back the Test protocol list. Refer
to the section “Downloading Data from the Mobile Monitor” to re-
trieve the data that has been stored on the device during the recording
session.
