Trigno
TM
Personal Monitor User’s Guide
21
Changes to the PC settings may be synchronized with the Trigno
Personal Monitor at any time by selecting the “Synchronize Now”
option.
Figure 16:
The TPM Synchronization options located at the
lower right corner of the Test Configuration Manager.
Data Collection
Data collection is initiated by selecting one of the loaded “Tests” (i.e.
data collection protocols) on the Trigno Personal Monitor. Select
“Tests” from the TPM home screen using softkey 1 to display a list
of test protocols that have loaded onto the device. Scroll through the
list of protocols using the directional arrows, and select the desired
protocol using softkey 1 or the select button.
Figure 17:
Using Sofkey 1 to select the “Tests” menu and then a
specific test protocol.
Once a Test is selected, The Trigno Personal Monitor will show all
the available resources for the test, and indicate if any are missing. It
is possible to continue to data collection even if all resources needed
for the protocol are not present, but the data collection may not run
to completion if this is the case. Press softkey 1 to continue to data
collection. Press softkey 1 again to begin collecting data.
