YDT-35 Operating and Servicing Manual
54
HL066(EN) ISSUE 1, 05/2015
8 Appendix 1 - Health and safety data sheet
HEALTH & SAFETY DATA SHEET
DATE Pub. No.
Information regarding the safe handling & storage of the named product.
MAR 97
Applicable to employees and customers.
PRODUCT
WARNING
CALIBRATION FLUID (ISO 4113)
SEEK IMMEDIATE MEDICAL ATTENTION IF
INGESTED
USE
CLASSIFICATION
TEST FLUID FOR DIESEL INJECTORS,
FLAMMABLE
INJECTION PUMPS & OTHER DIESEL EQUIPMENT
PRODUCT DESCRIPTION - COMPOSITION
THESE FLUIDS ARE PETROLEUM BASED PRODUCTS CONTAINING SIGNIFICANT PROPORTIONS OF THE
MORE VOLATILE PETROLEUM FRACTIONS AND OTHER SOLVENTS USED FOR LUBRICATION, ANTI-
CORROSION AND DERMATITIC INHIBITION.
SAFE HANDLING ADVICE
(Protection - Usage, Storage & Transport)
USAGE:
1) Avoid eye splashes and extended skin contact.
2) Do NOT take internally.
3) Keep mist generated by machinery to a minimum, also avoid where possible vapours caused by elevated
temperatures.
4) Protective clothing to be regularly laundered.
STORAGE:
These are flammable products which should be stored in closed containers away from heat in a well ventilated area.
EMERGENCY & FIRST AID PROCEDURE
(Eyes, skin, ingestion, inhalation)
INGESTION:
Do NOT induce vomiting. Give a glass of water and get immediate medical attention at Hospital.
EYES:
Flush with large amounts of water for 15 minutes. Seek medical help if irritation persists.
SKIN:
Wash thoroughly with soap & water. Seek medical help if irritation or skin rashes occur. Remove any contaminated
clothing.
INHALATION: Inhalation includes oil mists or vapours. Remove victim to fresh air. Seek medical help if affliction persists.
FIRE HAZARDS & PROTECTION
(Flash point, spillage)
SPILLAGE:
Contain spillages with sand or mineral absorbent material. Mop up and clean floor to remove oil residue.
FLASH POINT: Above 75°C.
FIRE:
(Extinguisher media)
Use carbon dioxide, dry chemical powder or foam extinguishers. Do NOT use water jets.
ENVIRONMENTAL PROTECTION
(Spillage land / water, disposal)
SPILLAGE:
Advise authorities if product has entered or may enter sewers, water courses or extensive land areas.
DISPOSAL:
All waste should be put into identified containers and stored at a specific disposal point.
Arrange for off site disposal in accordance with local regulations for notified waste.
HARTRIDGE LTD
Network 421, Radclive Rd, Buckingham,
MK18 4FD, England.
THE INFORMATION AND RECOMMENDATIONS IN THIS PUBLICATION ARE TO THE BEST OF OUR KNOWLEDGE INFORMATION AND BELIEF ACCURATE
AT THE TIME OF PUBLICATION NOTHING HEREIN TO BE CONSTRUED AS A WARRANTY, EXPRESS OR IMPLIED IN ALL CASES. IT IS THE
RESPONSIBILITY OF THE USERS TO DETERMINE THE SUITABILITY OF ANY PRODUCTS FOR THEIR OWN PARTICULAR PURPOSE. RECOMMENDATIONS
FOR HANDLING, PROTECTION ETC. ARE ADVISORY ONLY.
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
