YDT-35 Operating and Servicing Manual
HL066(EN) ISSUE 1, 05/2015
21
Figure 3.7 Spray Chamber Filling
6. Remove the funnel and refit the injector O-ring into the top of the spray chamber (Figure
3.8).
Figure 3.8 Injector O-Ring
7. Backleak (Return) Flow Measurement option -
Locate the backleak measurement device into the lower support bracket and push the top of
backleak measurement device into the quick-fit port (Figure 3.9, item 1). Locate the backleak
injector hose from the application kit and fit this into the backleak lower quick-fit connector
(Figure 3.9, item 2).
If the Return Flow Measurement option is not used, connect the backleak injector hose
directly into the quick-fit port.
2
1
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
