YDT-35 Operating and Servicing Manual
20
HL066(EN) ISSUE 1, 05/2015
Figure 3.5 Tank Filling
4. Remove the rubber blanking plug located in the top of the fuel spray chamber (Figure 3.6,
item 1). Using a suitable tool, remove the injector O-ring from the top of the fuel spray
chamber (Figure 3.6, item 2).
Figure 3.6 Spray Chamber
5. Fit the supplied funnel into the top of the spray chamber and using the injector clamp, secure
the funnel in position. Ensure the funnel nose is tight against the opening within the spray
chamber (Figure 3.7, item 1). Carefully fill the spray chamber with ISO4113 fluid until the
chamber is full (Figure 3.7, item 2).
2
1
1
2
5
6
3
4
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
