66
Units
Use the Units option to set the various units of measure
used on the device.
To modify the units settings
From any page, go to
MENU > Device Setup > Units
.
Use the drop-down lists to select the various unit settings.
Coordinates: Primary
–Select
Degrees
;
Degrees,
Minutes
;
Deg, Min, Sec; UTM/UPS
; or
USNG/MGRS
.
Datum: Primary
–Various. The default datum is
WGS84.
Coordinates: Secondary
–Select
UTM/UPS
;
Degrees
;
Degrees, Minutes
;
Deg, Min, Sec
; or
USNG/MGRS
.
Datum: Secondary
–Various
Measures
–Select
Statute Miles, Kilometers,
Nautical Miles/Feet,
or
Nautical Miles/Meters
.
Pressure
–PN-40 only. Select
Inches of Mercury,
Millibars,
or
Pascals
.
Bearing
–Select
True
or
Magnetic
.
Note
The Coordinates: Primary setting controls what the
device displays on the map when the cursor moves. The
Coordinates: Secondary field lets you pick a different set-
ting to use in an info field.
To restore the default settings
To restore the default settings for Units options, from any
page go to
MENU > Device Setup > Units > Restore
Defaults.
Page Order
You can add or remove pages from the
PAGE
button order
(you cannot remove the Map Page). When you add a page
to the
PAGE
button order, it no longer appears in the menu
list—you must press the
PAGE
button until that page
displays. You can also change the order in which pages are
displayed.
To modify the
PAGE
button order, from any page, go to
MENU > Device Setup > Page Order.
To add a page, select the check box next to it.
To remove a page, clear the check box next to it.
To change the page order, highlight the item you want
The Device Setup Page
