manualshive.com logo in svg

DeLorme Earthmate PN-30, User Manual

Share
Download
DeLorme Earthmate PN-30 User Manual Download Page 29

27

The Compass Page

the Routes Page, go to 

MENU > Edit Route Settings > 

Compass Navigation Arrow

.

To change the hiking route arrow from the Compass Page, 
press 

MENU > Compass Navigation Arrow > Direct to 

Next Waypoint

 or 

Back on Course

.

Info Fields

You can hide/show, change, and arrange the info fields at 
the bottom of the Compass Page. The info fields change 
when you are navigating. To access the Info Fields options, 
go to 

MENU > Info Fields

. For more information, see the 

Info Fields

 section beginning on page 9.

Electronic Compass

PN-40 Only

The PN-40 has an electronic compass that shows your 
directions when you are stationary or almost motionless. 
When your speed is 1.5 mph or higher, the compass 
reading is based on your GPS location.

When the electronic compass reading is not accurate, 
“Poor Accuracy” displays in the bottom right corner of the 
screen, and a red exclamation point appears in the Heading 
info field. When you see this indicator, you may want to 
calibrate the compass, unless you know the inaccuracy is 
caused by a temporary event, such as being near power 

lines or near a magnetic field, such as a car. You may want 
to disable the electronic compass when you are in an area 
with magnetic interference. For more information, see 

Compass and Altimeter

 starting on page 74.

Calibrating Sensors

PN-40 only

You can calibrate the PN-40's electronic compass and 
barometric altimeter with the Calibrate option on the 
Satellite Page menu, the Compass Page menu, and the 
Device Setup > Compass & Altimeter menu. The Device 
Setup > Compass & Altimeter options allow you to 
disable/enable the electronic compass, the barometric 
altimeter, and the auto-calibrate altimeter option. For more 
information, see 

Compass and Altimeter

 starting on page 74.

Other Menu Options

When navigating, additional options are available on the 
Compass Page menu. 

View Comment Details

When navigating to a waypoint or geocache, the View 
Comment Details option allows you to view the comment 
for the waypoint or geocache. If you view another waypoint 
or geocache, View Comment Details displays the most 
recent comment details viewed.

Go to 

MENU > View Comment Details

. 

Summary of Contents for Earthmate PN-30


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands