62
The Device Setup Page
To open the Device Setup Page, from any page go to
MENU > Device Setup
. If you have added the Device
Setup Page to the
PAGE
button sequence, it is no longer
available on menus. Press the PAGE button until it appears.
Use the Device Setup Page options to modify the default
settings on the PN-Series GPS. You can also view and
manage internal and SD card memory use and restore the
device’s default system settings.
System
Use the System options to modify GPS/WAAS settings,
select the battery type, enable/disable USB power, and
view and manage memory information.
To change system settings
From any page, go to
MENU > Device Setup > System
Use the drop-down lists to select system settings.
GPS Settings
Normal
»
–Normal GPS use.
Power Saving
»
–Turns off backlight after 15 seconds
and reduces processor speeds.
Disable GPS
»
–Turns off GPS satellite tracking. See
To disable GPS
on page 13.
Demo Mode
»
–Enables Demo Mode. See
To view or
hide Demo Mode
on page 4.
WAAS
–Select
Enabled
or
Disabled
. See
GPS and
WAAS Status
on page 13.
Battery Type
–Select
Alkaline
,
Lithium
,
NiMH
, or
Li-ion
(Rechargeable)
—use only DeLorme Li-ion
batteries. See
Installing the Batteries
on page 2.
USB Power
–Select
Enabled
or
Disabled
to determine
if the device can receive power from a computer
USB port.
To view memory use
You can view how much space is available on the device's
internal memory or an SD card in the device.
From any page, go to
MENU > Device Setup > System >
Memory Use
.
You can view:
Internal memory use
SD card memory use
The Device Setup Page
