4
To turn off the PN-Series GPS
Press
Power
and then press
ENTER
when you see the
confirmation message.
To view or hide Demo Mode
When you first turn on the PN-Series GPS, it opens in
Demo Mode.
To view the demo, follow the on-screen instructions.
To exit the demo, press
QUIT
.
To disable Demo Mode—from the first screen, press
ENTER
to clear the
Show at Startup
check box.
To restore Demo Mode, go to
MENU > Device Setup
> System > GPS Settings > Demo Mode
.
Note
You must disable Demo Mode if you want to view
the Connect to Computer screen when you connect your
device to your computer. For more information about con-
necting your device to your computer, see
Connecting to a
Computer
on page 72.
To reset the PN-Series GPS
To reset the PN-Series GPS when it is on, press and hold
Power
for seven seconds. You can also remove the
batteries and then reinstall them.
Data Management
The PN-Series GPS stores waypoints, geocaches, tracks,
routes, and the base map data in its internal memory. You
can save maps in the device's internal memory or on a
removable memory card (SD/SDHC/MMC) located under
the battery compartment.
To view and manage memory information, go to
MENU >
Device Setup > System > Memory Use.
Detailed Map Data
Your PN-Series GPS comes with a base map showing
overview-level worldwide coverage, as well as U.S. inter-
states and routes, state routes, and major roads. While
this provides a great view of a large area, chances are that
you will want a detailed view of a smaller area for hiking,
geocaching, and other activities.
You can transfer detailed maps and map packages to the
PN-Series GPS using:
Getting Started
