DeLonghi DCH5531, Instructions For Use Manual

Page: 3 / 26

2
Voltage
Wattage
See rating plate
Tensione
potenza
vedi targa caratteristica
Τάση Ισχύς βλέπε πινακίδα χαρακτηριστικών
Напряжение
и мощность
см. табличку с характеристиками
Feszültség
teljesítmény
lásd adattábla
Napětí,
výkon
viz štítek s údaji
Napájacie
napätie
pozri štítok s technickými údajmi
Napięcie
moc
zobacz tabliczkę znamionową
Voltspen-
ning
se merkeskiltet
Spänning,
effekt
se märkplåt
Strømstyrke se typeskilt
Jännite katso arvokylttiä
Napon
snaga
vidi pločicu s tehničkim podacima
Napetost,
moč
glejte tablico lastnosti
Напрежение
мощност
вж. табелката с характеристиките
Tensiune
putere
vezi plăcuţa cu caracteristici
Kuvvet
gerilimi
özellikler plakasına bakın
Tension
puissance
voir plaque signalétique
Voltagem de
potência
Leistun-
gsspannung
siehe Typenschild
Spanning
vermogen
zie typeplaatje
Tension
Potencia
Véase la placa de las características
Ver chapa de características
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should
be cut off from the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be re-fitted when changing the fuse using a 13 Amp Asta
approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover
can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on
the base of the plug.
B) If your appliance is not fitted with a plug, please follow the instructions provided below:
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which si marked with the letter L or coloured red.
ELECTRICAL CONNECTION (U.K. ONLY)