Replacing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the tabs on the hard-drive cage with the slots on the chassis and
slide the hard drive in place.
2
Replace the screws that secure the hard-drive cage to the chassis.
3
If applicable, connect the power and data cables to the secondary hard-
drive.
Post-requisites
1
Replace the
primary hard-drive
.
2
Replace the
computer cover
.
52
Summary of Contents for XPS 8900
