Dell XPS 8900 Service Manual Download

Page: 33 / 107

Removing the graphics card

(optional)

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before working inside your computer

. After working inside your

computer, follow the instructions in

After working inside your

computer

. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

Remove the

computer cover

Remove the

graphics-card bracket

Procedure

Remove the screw that secures the card-retention bracket to the chassis.

Lift and slide the card-retention bracket out of the chassis.

NOTE: Your graphics card may have power-cable connectors.

Press the releasing clip on the power-cable connectors and disconnect

the power cables from the graphics card, if applicable.

Locate the graphics card (SLOT1 or SLOT4) on the system board and

make note of the graphics-card slot.
For more information, see “

System-board components

”.

NOTE: The appearance of the securing tab may be different on your
computer.

Summary of Contents for XPS 8900












































































































Search results

Summary of Contents for XPS 8900

Reviews:

Related manuals for XPS 8900

Brands by name

Popular brands

Dell XPS 8900, Service Manual

Search results

Summary of Contents for XPS 8900

Reviews:

Related manuals for XPS 8900

Brands by name

Popular brands