Replacing the solid-state drive
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.
Procedure
1
Align the notch on the solid-state drive board with the tab on the system
board.
2
Insert the solid-state drive board at a 45-degree angle into the system
board.
45
Summary of Contents for XPS 8900
