Dell XPS 12 Owner'S Manual Download

Page: 56 / 66

| Replacing

the

Windows-Button

Board

Replacing the Windows-Button Board

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in

"After Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

Procedure

Connect the windows-button board cable to the connector on the windows-button
board.

Use the alignment posts to place the windows-button board on the display panel.

Replace the screws that secure the windows-button board to the display panel.

Postrequisites

Replace the display back-cover. See "Replacing the Display Back-Cover" on
page 49.

Replace the battery. See "Replacing the Battery" on page 14.

Replace the base cover. See "Replacing the Base Cover" on page 12.

Follow the instructions in "After Working Inside Your Computer" on page 9.

book.book Page 56 Tuesday, October 23, 2012 12:44 AM

Summary of Contents for XPS 12



































































Search results

Summary of Contents for XPS 12

Reviews:

Related manuals for XPS 12

Brands by name

Popular brands

Dell XPS 12, Owner'S Manual

Search results

Summary of Contents for XPS 12

Reviews:

Related manuals for XPS 12

Brands by name

Popular brands