Dell XPS 12 Owner'S Manual Download

Page: 2 / 66

Notes, Cautions, and Warnings

NOTE:

A NOTE indicates important information that helps you make better

use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

____________________

Trademarks used in this text: Dell™, the DELL logo, and XPS™ are trademarks of Dell Inc.;
Microsoft

, Windows

, and the Windows start button logo

are either trademarks or

registered trademarks of Microsoft corporation in the United States and/or other countries;
Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by

Dell under license.

2012 - 10

Rev. A00

book.book Page 2 Tuesday, October 23, 2012 12:44 AM

Summary of Contents for XPS 12



































































Search results

Summary of Contents for XPS 12

Reviews:

Related manuals for XPS 12

Brands by name

Popular brands

Dell XPS 12, Owner'S Manual

Search results

Summary of Contents for XPS 12

Reviews:

Related manuals for XPS 12

Brands by name

Popular brands