Dell S4048T-ON, Configuration Manual

Page: 799 / 1146

After you configure other privilege levels, enter those levels by adding the level parameter after the
enable
command or by configuring a
user name or password that corresponds to the privilege level. For more information about configuring user names, refer to Configuring a
Username and Password .
By default, commands in Dell Networking OS are assigned to different privilege levels. You can access those commands only if you have
access to that privilege level. For example, to reach the
protocol spanning-tree command, log in to the router, enter the enable
command for privilege level 15 (this privilege level is the default level for the command) and then enter CONFIGURATION mode.
You can configure passwords to control access to the box and assign different privilege levels to users. Dell Networking OS supports the
use of passwords when you log in to the system and when you enter the
enable
command. If you move between privilege levels, you are
prompted for a password if you move to a higher privilege level.
Configuration Task List for Privilege Levels
The following list has the configuration tasks for privilege levels and passwords.
• Configuring a Username and Password (mandatory)
• Configuring the Enable Password Command (mandatory)
• Configuring Custom Privilege Levels (mandatory)
• Specifying LINE Mode Password and Privilege (optional)
• Enabling and Disabling Privilege Levels (optional)
For a complete listing of all commands related to Dell Networking OS privilege levels and passwords, refer to the Security chapter in the
Dell Networking OS Command Reference Guide .
Configuring a Username and Password
In Dell Networking OS, you can assign a specific username to limit user access to the system.
To configure a username and password, use the following command.
• Assign a user name and password.
CONFIGURATION mode
username name [access-class access-list-name ] [nopassword | password [ encryption-type ]
password ] [privilege level ][secret]
Configure the optional and required parameters:
•
name
: Enter a text string up to 63 characters long.
•
access-class access-list-name
: Enter the name of a configured IP ACL.
•
nopassword
: Do not require the user to enter a password.
•
encryption-type
: Enter 0 for plain text or 7 for encrypted text.
•
password
: Enter a string.
• privilege level The range is from 0 to 15.
•
Secret:Specify the secret for the user
To view username, use the
show users
command in EXEC Privilege mode.
Security 799