[no] rmon collection history {controlEntry
integer
} [owner
ownername
] [buckets
bucket-number
]
[interval
seconds
]
•
controlEntry
: specifies the RMON group of statistics using a value.
•
integer
: a value from 1 to 65,535 that identifies the RMON group of statistics. The value must be a unique index in the RMON
History Table.
•
owner
: (Optional) specifies the name of the owner of the RMON group of statistics. The default is a
null-terminated string
.
•
ownername
: (Optional) records the name of the owner of the RMON group of statistics.
•
buckets
: (Optional) specifies the maximum number of buckets desired for the RMON collection history group of statistics.
•
bucket-number
: (Optional) a value associated with the number of buckets specified for the RMON collection history group of
statistics. The value is limited to from 1 to 1000. The default is
50
(as defined in RFC-2819).
•
interval
: (Optional) specifies the number of seconds in each polling cycle.
•
seconds
: (Optional) the number of seconds in each polling cycle. The value is ranged from 5 to 3,600 (Seconds). The default is
1,800
(as defined in RFC-2819).
Example of the
rmon collection history
Command
To remove a specified RMON history group of statistics collection, use the
no
form of this command.
The following command example enables an RMON MIB collection history group of statistics with an ID number of 20 and an owner of
john
, both the sampling interval and the number of buckets use their respective defaults.
Dell(conf-if-mgmt)#rmon collection history controlEntry 20 owner john
Remote Monitoring (RMON)
781
Summary of Contents for S4048T-ON
