Dell S2810dn User Manual Download Page 230

Page: 230 / 316

230

Using Digital Certificates

Confirm the content, and click

Use This Certificate

at the upper-right corner.

Confirming the Settings of a Digital Certificate

NOTE:

To manage digital certificates, you must set up HTTPS communication. For details, see "Preparing to Manage

Certificates."

Launch

Dell Printer Configuration Web Tool

Open the web browser.

Enter the IP address of your printer in the web browser.

See "Dell™ Printer Configuration Web Tool.

Select

Print Server Settings

Click the

Security

tab.

Select

SSL/TLS

Click

Certificate Management

to display the

Certificate Management

page.

Select the category from the

Category

list.

Select the purpose of use from the

Certificate Purpose

list.

Click

Display the List

to display the

Certificate List

page.

NOTE:

If the list includes more than 20 certificates, click Next to display the next page.

The certificate displayed with an asterisk as "

*Valid

" in the

Validity

column is the certificate associated with the

use purpose and actually used.

Deleting a Digital Certificate

NOTE:

To manage digital certificates, you must set up HTTPS communication. For details, see "Preparing to Manage

Certificates."

Launch

Dell Printer Configuration Web Tool

Open the web browser.

Enter the IP address of your printer in the web browser.

See "Dell™ Printer Configuration Web Tool.

Select

Print Server Settings

Click the

Security

tab.

Select

SSL/TLS

Click

Certificate Management

to display the

Certificate Management

page.

Select the category from the

Category

list.

Select the purpose of use from the

Certificate Purpose

list.

Click

Display the List

to display the

Certificate List

page.

NOTE:

If the list includes more than 20 certificates, click Next to display the next page.

Select the certificate to be deleted.

Click

Certificate Details

to display the

Certificate Details

page.

To delete the selected certificate, click

Delete

at the upper-right corner.

NOTE:

When a certificate is deleted, the features associated with the deleted certificate are disabled. To delete a

certificate being used, either set the feature to OFF in advance or switch the association to another certificate, and then

switch to another operation mode if possible before deleting the certificate.

Summary of Contents for S2810dn





























































































































































































































































































































Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands

Dell S2810dn, User Manual

Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands