Dell S2810dn User Manual Download Page 108

Page: 108 / 316

108

Dell™ Printer Configuration Web Tool

Reports

Purpose:

To print various types of reports and lists.

Values:

Printer Settings

The

Printer Settings

tab includes

System Settings

Network Settings

USB Settings

PCL Settings

PS Settings

PDF Settings,

and

Secure Settings

pages.

System Settings

Purpose:

To configure the basic printer settings.

Values:

Printer Settings

Click

Start

to print the Printer Settings report.

Panel Settings

Click

Start

to print the Panel Settings report.

PCL Fonts List

Click

Start

to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.

PCL Macros List

Click

Start

to print the PCL Macro List.

PS Fonts List

Click

Start

to print the PS Fonts List.

PDF Fonts List

Click

Start

to print the PDF Fonts List.

Job History

Click

Start

to print the Job History report.

Error History

Click

Start

to print the Error History report.

Print Meter

Click

Start

to print the Print Meter report.

Demo Page

Click

Start

to print Demo Page.

Stored Documents

Click

Start

to print the Stored Documents list.

This item is available only when RAM Disk is enabled.

Power Saver Time - Sleep

Sets the time taken by the printer to enter Sleep mode after it finishes a job.

Power Saver Time - Deep Sleep

Sets the time taken by the printer to enter Deep Sleep mode after it has

entered Sleep mode.

Power Saver Time - Power Off Timer

Sets the time taken by the printer to be turned off after it has entered Deep

Sleep mode.

mm / inch

Sets the measurement unit to be used on the LCD panel as either mm or

inches.

Control Panel Tone

Sets the volume of the tone that is emitted when the operator panel input is

correct, or disables the tone.

Invalid Key Tone

Sets the volume of the tone that is emitted when the operator panel input is

incorrect, or disables the tone.

Machine Ready Tone

Sets the volume of the tone that is emitted when the printer becomes ready,

or disables the tone.

Job Completed Tone

Sets the volume of the tone that is emitted when a print job is complete, or

disables the tone.

Fault Tone

Sets the volume of the tone that is emitted when a job ends abnormally, or

disables the tone.

Summary of Contents for S2810dn





























































































































































































































































































































Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands

Dell S2810dn, User Manual

Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands