Dell S2810dn User Manual Download Page 149

Page: 149 / 316

Understanding the Printer Menus

149

Protocols

Purpose:

To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.

Values:

Subnet Mask

When an IP address is being set manually, the subnet mask is

specified using the format nnn.nnn.nnn.nnn. Each octet that

makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.

255.255.255.255 cannot be specified as the subnet mask.

Gateway Address

When an IP address is being set manually, the gateway address is

specified using the format nnn.nnn.nnn.nnn. Each octet that

makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.

127 and any value in the range of 224 to 254 cannot be specified

for the first octet of a gateway address.

Ipsec

Disable

Disables Ipsec.

Ipsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.

LPD

Disable

Disables the LPD port.

Enable

Enables the Line Printer Daemon (LPD) port.

Port9100

Disable

Disables the Port9100 port.

Enable

Enables the Port9100 port.

FTP

Disable

Disables the FTP port.

Enable

Enables the FTP port.

IPP

Disable

Disables IPP port.

Enable

Enables IPP port.

SMB TCP/IP

Disable

Disables SMB TCP/IP port.

Enable

Enables SMB TCP/IP port.

WSD Print

Disable

Disables Web Services on Devices (WSD) port.

Enable

Enables Web Services on Devices (WSD) port.

SNMP UDP

Disable

Disables the Simple Network Management Protocol (SNMP) UDP port.

Enable

Enables the Simple Network Management Protocol (SNMP) UDP port.

E-mail Alert

Disable

Disables the E-mail Alert feature.

Enable

Enables the E-mail Alert feature.

EWS

Disable

Disables access to the

Dell Printer Configuration Web Tool

embedded in the

printer.

Enable

Enables access to the

Dell Printer Configuration Web Tool

embedded in the

printer.

Bonjour(mDNS)

Disable

Disables Bonjour (mDNS).

Enable

Enables Bonjour (mDNS).

Telnet

Disable

Disables Telnet.

Enable

Enables Telnet.

HTTP-SSL/TLS

Disable

Disables HTTP-SSL/TLS.

Enable

Enables HTTP-SSL/TLS.

Summary of Contents for S2810dn





























































































































































































































































































































Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands

Dell S2810dn, User Manual

Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands