Dell S2810dn User Manual Download Page 117

Page: 117 / 316

Dell™ Printer Configuration Web Tool

117

E-Mail Server Setup Page

Displays the current settings of the e-mail server.

Print Server Settings

The

Print Server Settings

tab includes the

Basic Information

Port Settings

TCP/IP

SMB

E-Mail Server

Bonjour

(mDNS)

SNMP

SNTP

AirPrint, Google Cloud Print, Proxy Server, Wi-Fi, Wi-Fi Direct,

and

Reset Print Server

pages.

Basic Information

Purpose:

To configure basic information of the printer.

Values:

NOTE:

The Auto Refresh feature is effective for the contents of the top frame, Printer Status page, Job List page, and Completed

Jobs page.

Port Settings

Purpose:

To enable or disable printing ports and management protocol features.

Values:

System Settings

Printer Name

Sets the name of the printer.

Location

Sets the location of the printer.

Contact Person

Sets the contact name, number, and other information of the printer

administrator and service center.

Administrator E-Mail

Address

Sets the contact address of the printer administrator and service center.

Asset Tag Number

Enters the asset tag number for the printer.

Dell Printer

Configuration Web Tool

Settings

Auto Refresh

Automatically refreshes the contents of the status display pages.

Auto Refresh Interval

Sets the time interval for refreshing the contents of the status display pages

automatically from 15 to 600 seconds.

Ethernet

Ethernet Settings

Auto

Detects the Ethernet transmission rate and the

duplex settings automatically.

10Base-T Half-Duplex

Selects 10Base-T Half-Duplex as the default

value.

10Base-T Full-Duplex

Selects 10Base-T Full-Duplex as the default

value.

100Base-TX Half-Duplex

Selects 100Base-TX Half-Duplex as the default

value.

100Base-TX Full-Duplex

Selects 100Base-TX Full-Duplex as the default

value.

1000Base-T Full-Duplex

Selects 1000Base-T Full-Duplex as the default

value.

Current Ethernet Settings

Displays the current settings of the Ethernet.

MAC Address

Displays the MAC address of the printer.

Summary of Contents for S2810dn





























































































































































































































































































































Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands

Dell S2810dn, User Manual

Search results

Summary of Contents for S2810dn

Reviews:

Brands by name

Popular brands