Dell PowerVault NX3500, Administrator'S Manual, Page: 98 / 218

98
Using Volumes, Shares, and Quotas
Removing an NFS Export
To remove an NFS Export do the following:
1 Select the check box next to the NFS Export you want to remove.
2 Click Delete in the Action bar.
Access Using NFS
From a shell on a client system, use the su command to log in as root and type
the following command:
mount -o rw,bg,hard,nointr,tcp,vers=3,timeo=
2,retrans=10,rsize=32768,wsize=32768
<client_access_vip>:/<exported_folder>
local_folder
NOTE:
The above parameters are the recommended parameters. It is
possible to change the protocol from tcp to udp, and the NFS version from 3 to 2.
To allow a UDP connection, you can configure the firewall settings in two
primary ways:
• Adjust the firewall settings so that the source IP address comes from either
of the two controllers and not the client VIP.
• Open the port range for UDP to allow ports as follows:
For TCP connections, no special settings are needed. Adjust the firewall
settings to let any communication pass along the TCP connection.
Service Name FluidFS Port
portmap 111
Statd 4000 through 4008
Nfs 2049 through 2057
nlm (lock manager) 4050 through 4058
mount 5001 through 5009
quota 5051 through 5059