Dell PowerVault NX3500 Administrator'S Manual Download Page 139

Page: 139 / 218

Managing the PowerVault NX3500

139

Select

Authenticate users' identity via Active Directory and local

user database

Click

Save Changes

to save the CIFS configuration parameters.

This restarts all user connections.

To authenticate users using an internal user database:

Select

System Managemen



Protocols



CIFS Configuration

Click

General

Select

Allow clients to access files via the CIFS protocol

to enable the

CIFS file sharing protocol.

Type a short description of the server in the

System description

field.

This description is displayed in the Network Neighborhood.

Select

Authenticate users' identity via local users database

Click

Save Changes

to save the CIFS configuration parameters.

This restarts all user connections.

To deny users from accessing files using the CIFS protocol:

Select

System Management



Protocols



CIFS Configuration

Click

General

Clear the

Allow clients to access files via the CIFS protocol

check box.

Click

Save Changes

to save the CIFS configuration parameters.

This restarts all user connections.

Configuring Advanced CIFS Parameters

In the

Advanced

tab you can set the following:

• Which character sets is used by DOS code pages.
• Which UTF-8 character set is used by PowerVault NX3500.

To configure advanced CIFS parameters:

Select

System Management



Protocols



CIFS Configuration

Click

Advanced

and configure the parameters.

Click

Save Changes

to save the CIFS configuration parameters.

This restarts all user connections.

Summary of Contents for PowerVault NX3500



























































































































































































































Search results

Summary of Contents for PowerVault NX3500

Reviews:

Dell PowerVault NX3500, Administrator'S Manual, Page: 139 / 218

Search results

Summary of Contents for PowerVault NX3500

Reviews: