manualshive.com logo in svg

Dell PowerVault NX3500, Administrator'S Manual, Page: 178 / 218

Share
Download
Dell PowerVault NX3500 Administrator'S Manual Download Page 178

178

Troubleshooting

BPS LED Is Off

Troubleshooting NAS File Access and 

Permissions Issues

Cannot Change the Ownership of a File or a Folder

Description

BPS LED is off and does not turn on when the power button 

is pressed.

Cause

This issue occurs either because the battery is not installed correctly, 

there is no power to the BPS, or there is a hardware failure.

Workaround

1

Remove the BPS module bezel. Ensure that the battery is installed 

properly and turn on the BPS by pressing the BPS power button.

2

Verify if the BPS cables are connected properly and that the utility 

power matches the BPS specifications. LV models require a 120 V 

input and HV models require a 208 V input. Turn on BPS by 

pressing the BPS power button.

3

If none of the above actions resolves the issue, contact Dell 

technical support.

Description

Every file on the NAS system is owned by either a UNIX or NTFS 

user. Inability to change ownership is treated differently, 

depending on whether the access is native or non-native.

Cause

The user is not authorized to perform the ownership change.

Workaround

An authorized user should perform this action.

Summary of Contents for PowerVault NX3500



























































































































































































































Reviews:

No comments