manualshive.com logo in svg

Dell PowerVault NX3500, Administrator'S Manual, Page: 158 / 218

Share
Download
Dell PowerVault NX3500 Administrator'S Manual Download Page 158

158

Troubleshooting

CIFS Delete-On-Close Denial

CIFS File Access Denied

CIFS File Sharing Conflict

Description

Files are deleted while they are in use.

Cause

If a file is deleted when it is open, it is marked for deletion, and is 

deleted after it is closed. Until then, the file appears in its original 

location but the system denies any attempt to open it.

Workaround

Notify the user who tried to open the file that the file has 

been deleted.

Description

CIFS file access denied.

Cause

Client has insufficient privileges to perform the requested 

operation on the file.

Workaround

This is an informative event. The user may request to modify the 

file ACL to allow access.

Description

CIFS file sharing conflict.

Cause

When a file is opened using the CIFS protocol, the opening 

application communicates the sharing mode that must be used 

while this file is open.
This sharing mode describes what other users' activities are allowed 

on this file, while it is open.
This definition is sent by the application and the user cannot 

control/configure it.
Once there is a violation of the sharing definition, the user receives 

an access denied error and this event is issued.

Workaround

This is an informative event, the admin may contact the locking 

user and request to close the application referencing this file.
It could be that the application which opened the file did not shut 

down gracefully. It is recommended to reboot the client if possible.

Summary of Contents for PowerVault NX3500



























































































































































































































Reviews:

No comments