manualshive.com logo in svg

Dell PowerVault NX3500, Administrator'S Manual, Page: 211 / 218

Share
Download
Dell PowerVault NX3500 Administrator'S Manual Download Page 211

BPS Alarms

211

Output short 

circuit

Indicates that the UPS 

has detected 

abnormally low 

impedance placed on its 

output and considers it 

a short circuit.

Beeping

Contact Dell.

Heatsink over 

temperature

The UPS has detected 

that one of its heat 

sinks has exceeded the 

maximum operating 

temperature defined by 

Hardware.

Beeping

Contact Dell.

Fatal 

EEPROM 

fault

Set in parallel with 

EEPROM Range Check 

Failure, Incorrect 

Model EEPROM Map, 

and EEPROM 

Checksum Failure 

alarms.

Continuous Contact Dell.

Fan failure

UPS has detected that 

one or more fans are not 

functioning properly.

Continuous Contact Dell.

Table A-1. External Alarm Conditions 

(continued)

Alarm

Description

Audible

Corrective Action

Summary of Contents for PowerVault NX3500



























































































































































































































Reviews:

No comments