manualshive.com logo in svg

Dell PowerVault NX3500, Administrator'S Manual, Page: 161 / 218

Share
Download
Dell PowerVault NX3500 Administrator'S Manual Download Page 161

Troubleshooting

161

CIFS Write to Read Only Volume

Troubleshooting NFS Issues

Cannot Mount NFS Export

Description

Client tries to modify a file on read-only volume.

Cause

A NAS volume is set to read-only when it is the target of a replication.
The most frequent reason for this event is either:

• The user meant to access the target system for read purposes, but 

also tries to modify a file by mistake.

• The user accesses the wrong system due to similarity in name/IP.
• The user is accessing a NAS container, which was made a 

replication target without his knowledge.

Workaround

In order to write to this volume, replication must be detached first. 

Refer the user to the correct location.

Description

When attempting to mount an NFS export, the mount command 

fails due to various reasons such as:

• Permission denied.
• Server not responding due to port mapper failure - RPC timed out 

or input/output error.

• Server not responding due to program not registered.
• Access denied.
• Not a directory.

Summary of Contents for PowerVault NX3500



























































































































































































































Reviews:

No comments