manualshive.com logo in svg

Dell PowerVault NX3500, Administrator'S Manual, Page: 169 / 218

Share
Download
Dell PowerVault NX3500 Administrator'S Manual Download Page 169

Troubleshooting

169

Troubleshooting Replication Issues

Replication Configuration Error

Replication Destination Cluster is Busy

Workaround

A possible way to verify this problem is to use newgrp to 

temporarily change the primary group of the user and thus ensure 

it is passed to the server.
The simple workaround, although not always feasible, is to remove 

the user from unnecessary groups, leaving only 16 groups or less.

Description

Replication between the source and destination NAS volumes fails 

because the source and destination systems’ topologies 

are incompatible.

Cause

The source and destination systems are incompatible for 

replication purposes.

Workaround

Upgrade the PowerVault NX3500 which is down.

Description

Replication between the source NAS volume and the destination 

NAS volume fails because the destination cluster is not available to 

serve the required replication.

Cause

Replication task fails because the destination cluster is not 

available to serve the required replication.

Workaround

Administrators must verify the replication status on 

destination system.

Summary of Contents for PowerVault NX3500



























































































































































































































Reviews:

No comments