Dell PowerVault NX3500 Administrator'S Manual Download Page 202

Page: 202 / 218

202

Internationalization

NFS Clients

NFS clients may configure a different code page for different shares, while

supporting concurrently non-Unicode clients that use different languages.
For further information on configuring code pages see "Managing NFS

Exports" on page 97.

CIFS Clients

CIFS users may configure a code page to be used for all non-Unicode

Windows and DOS clients.

NOTE:

The web Interface provides full Unicode support. To display and use

Unicode data using the CLI, a UTF-8 XTERM should be used.

Unicode Configuration Parameters

The following configuration parameters may contain Unicode characters

Table 12-1. Unicode Configuration Parameters

Parameter

Unicode Character

CIFS

Server description

Home Shares

Directory name

SNMP

Contact
Location

NFS Exports

Directory name

CIFS Shares

Name
Directory
Description
Users
Groups

Summary of Contents for PowerVault NX3500



























































































































































































































Search results

Summary of Contents for PowerVault NX3500

Reviews:

Dell PowerVault NX3500, Administrator'S Manual, Page: 202 / 218

Search results

Summary of Contents for PowerVault NX3500

Reviews: