Dell PowerVault NX3200 Owner'S Manual Download Page 119

Page: 119 / 133

Error Code Message Information

BAT0002

Message

The system board battery has failed.

LCD Message

The system board battery has failed. Check battery.

Details

The system board battery is either missing or bad.

Action

See

Getting Help

BAT0017

Message

The <

name

> battery has failed.

LCD Message The <

name

> battery has failed. Check battery.

Details

The <

name

> battery is either missing, bad, or unable to charge due to thermal issues.

Action

Check system fans. If the problem persists, see

Getting Help

CPU0000

Message

CPU <

number

> has an internal error (IERR).

LCD Message CPU <

number

> has an internal error (IERR).

Details

System Event Log and Operating System Logs may indicate that the exception is
external to the processor.

Action

Review System Event Log and Operating System Logs. If the issue persists, see

Getting

Help

CPU0001

Message

CPU <

number

> has a thermal trip (over-temperature) event.

LCD Message CPU <

number

> has a thermal trip. Check CPU heat sink.

Details

The processor temperature increased beyond the operational range.

Action

Review the logs for fan failures. If no fan failures are detected, check inlet temperature
(if available) and reinstall processor heat sink. If the problem persists, see

Getting Help

CPU0005

Message

CPU <

number

> configuration is unsupported.

LCD Message

CPU <

number

> configuration is unsupported. Check CPU or BIOS revision.

Details

System is unable to boot or may run in a degraded state.

Action

Review the technical specifications for supported processor types.

CPU0010

Message

CPU <

number

> is throttled.

Details

The CPU is throttled due to thermal or power conditions.

Action

Review system logs for power or thermal exceptions.

CPU0023

Message

CPU <

number

> is absent.

LCD Message

CPU <

number

> is absent. Check CPU.

Action

Verify processor installation. If present, re-seat the processor.

119

Summary of Contents for PowerVault NX3200






































































































































Search results

Summary of Contents for PowerVault NX3200

Reviews:

Related manuals for PowerVault NX3200

Brands by name

Popular brands

Dell PowerVault NX3200, Owner'S Manual

Search results

Summary of Contents for PowerVault NX3200

Reviews:

Related manuals for PowerVault NX3200

Brands by name

Popular brands