Dell PowerVault NX3200, Owner'S Manual

Page: 128 / 133

Error Code Message Information
Action Check the event log for power supply failures. Review system configuration and power
consumption and upgrade or install power supplies accordingly.
PWR1005
Message The system performance degraded because the user-defined power capacity has changed.
Details The user-defined power settings have affected system operation.
Action If unintended, review system configuration changes and power policy.
PWR1006
Message The system halted because system power exceeds capacity.
LCD Message System power demand exceeds capacity. System halted.
Details The system halted because system power exceeds capacity.
Action Review system configuration, upgrade power supplies or reduce system power
consumption.
RFM1008
Message Failure detected on Removable Flash Media <
name
>.
LCD Message Removable Flash Media <
name
> failed. Check SD Card.
Details An error was reported during a SD card read or write.
Action Reseat the flash media. If the problem persists, see Getting Help .
RFM1014
Message Removable Flash Media <
name
> is write protected.
LCD Message Removable Flash Media <
name
> is write protected. Check SD Card.
Details The card is write-protected by the physical latch on the SD card. A write-protected
card cannot be used.
Action If unintended, remove the media and disable write protection.
RFM1201
Message Internal Dual SD Module redundancy is lost.
LCD Message Internal Dual SD Module redundancy is lost. Check SD Card.
Details Either one or both the SD cards are not functioning properly.
Action See Getting Help .
RFM2001
Message Internal Dual SD Module <
name
> is absent.
LCD Message Internal Dual SD Module <
name
> is absent. Check SD Card.
Details The SD card module is not detected or not installed.
Action If unintended, reinstall the SD module.
RFM2002
Message Internal Dual SD Module <
name
> is offline.
Details The SD card module is installed but may be improperly installed or configured incorrectly.
128