manualshive.com logo in svg

Dell PowerVault NX3200, Owner'S Manual, Page: 16 / 133

Share
Download
Dell PowerVault NX3200 Owner'S Manual Download Page 16

•

The 

Getting Started Guide

 provides an overview of setting up your system, and technical specifications. This 

document is available online at support.dell.com/manuals.

•

The rack documentation included with your rack solution describes how to install your system into a rack, if 

required.

•

Any media that ships with your system that provides documentation and tools for configuring and managing your 

system, including those pertaining to the operating system, system management software, system updates, and 

system components that you purchased with your system.

•

For the full name of an abbreviation or acronym used in this document, see the Glossary at support.dell.com/

manuals.

NOTE: Always check for updates on support.dell.com/manuals and read the updates first because they often 
supersede information in other documents.

16

Summary of Contents for PowerVault NX3200






































































































































Reviews:

No comments