manualshive.com logo in svg

Dell PowerVault NX3000, Hardware Owner'S Manual

Getting Started With the Dell PowerVault NX3000 is a breeze with our comprehensive user manual. Download it for free from manualshive.com and unlock the full potential of this powerful storage solution. This manual provides step-by-step instructions, ensuring a seamless experience with your NX3000.

Share
Download
background image

About Your System

15

Figure 1-2.

LCD Panel Features

Home Screen

The Home screen displays user-configurable information about the system. 
This screen is displayed during normal system operation when there are no 
status messages or errors present. When the system is in standby, the LCD 
backlight turns off after five minutes of inactivity if there are no error 
messages. Press one of the three navigation buttons (Select, Left, or Right) to 
view the Home screen. 

Item

Buttons

Description

1

Left

Moves the cursor back in one-step increments.

2

Select

Selects the menu item highlighted by the 
cursor.

3

Right

Moves the cursor forward in one-step 
increments. 

During message scrolling:

• Press once to increase scrolling speed.

• Press again to stop.

• Press again to return to default scrolling 

speed.

• Press again to repeat the cycle.

4

System ID

Turns the system ID mode on and off.

Press quickly to toggle the system ID on and 
off. If the system hangs during POST, press and 
hold the system ID button for more than five 
seconds to enter BIOS Progress mode.

1

2

4

3

Summary of Contents for PowerVault NX3000









































































































































































































Reviews:

No comments

Related manuals for PowerVault NX3000

Cactus 100 Series Product Manual preview
100 Series
Brand: Cactus Pages: 27
Acer Altos R700 Series Product Manual preview
Altos R700 Series
Brand: Acer Pages: 80
Acer Altos G700 series Rack Installation Instructions preview
Altos G700 series
Brand: Acer Pages: 14
Acer Extensa 500 System Manual preview
Extensa 500
Brand: Acer Pages: 103
Acer Altos R720 Series Installation & Configuration Manual preview
Altos R720 Series
Brand: Acer Pages: 104
IBM 990 Reference Manual preview
990
Brand: IBM Pages: 88
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Brand: Sangamo Pages: 2
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
IBM xSeries 235 User Manual preview
xSeries 235
Brand: IBM Pages: 66
Quanta Computer STRATOS S400-X44E Technical Manual preview
STRATOS S400-X44E
Brand: Quanta Computer Pages: 251
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
Planet GSW-2416SF User Manual preview
GSW-2416SF
Brand: Planet Pages: 54
Fast Mover FMT1203 Instruction Manual preview
FMT1203
Brand: Fast Mover Pages: 2

Brands by name

Popular brands

Load more brands