Dell PowerEdge T100 Hardware Owner'S Manual Download Page 82

Page: 82 / 160

Installing System Components

Figure 3-21.

Installing and Removing the Heat Sink

Release the socket-release lever before opening the processor shield. See
Figure 3-22.

Rotate the processor shield upward and out of the way.

Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.

NOTICE:

Be careful not to bend any of the pins on the ZIF socket when removing

the processor. Bending the pins can permanently damage the system board.

heat sink and shroud assembly

pivot bracket

captive screws (2)

diskette cable

book.book Page 82 Wednesday, June 24, 2009 8:21 AM

Summary of Contents for PowerEdge T100

































































































































































Search results

Summary of Contents for PowerEdge T100

Reviews:

Related manuals for PowerEdge T100

Brands by name

Popular brands

Dell PowerEdge T100, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge T100

Reviews:

Related manuals for PowerEdge T100

Brands by name

Popular brands