Dell PowerEdge R820 Owner'S Manual Download Page 128

Page: 128 / 143

Error Code

Message Information

Action

Review the technical specifications for supported processor types.

CPU0010

Message

CPU <

number

> is throttled.

Details

The CPU is throttled due to thermal or power conditions.

Action

Review system logs for power or thermal exceptions.

CPU0023

Message

CPU <

number

> is absent.

LCD Message

CPU <

number

> is absent. Check CPU.

Action

Verify processor installation. If present, re-seat the processor.

CPU0204

Message

CPU <

number

> <

name

> voltage is outside of range.

LCD Message

CPU <

number

> <

name

> voltage is outside of range. Re-seat CPU.

Details

Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.

Action

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

If the issue persists, see

Getting Help

CPU0700

Message

CPU <

number

> initialization error detected.

LCD Message

CPU <

number

> initialization error detected. Power cycle system.

Details

System BIOS was unable to initialize the processor.

Action

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

If the issue persists, see

Getting Help

CPU0701

Message

CPU <

number

> protocol error detected.

LCD Message

CPU <

number

> protocol error detected. Power cycle system.

Details

System event log and operating system logs may indicate that the
exception is external to the processor.

Action

Check system and operating system logs for exceptions. If no

exceptions are found, continue.

128

Summary of Contents for PowerEdge R820
















































































































































Search results

Summary of Contents for PowerEdge R820

Reviews:

Related manuals for PowerEdge R820

Brands by name

Popular brands

Dell PowerEdge R820, Owner'S Manual

Search results

Summary of Contents for PowerEdge R820

Reviews:

Related manuals for PowerEdge R820

Brands by name

Popular brands