Dell PowerEdge R820 Owner'S Manual Download Page 129

Page: 129 / 143

Error Code

Message Information

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

If the issue persists, see

Getting Help

CPU0702

Message

CPU bus parity error detected.

LCD Message

CPU bus parity error detected. Power cycle system.

Details

System event log and operating system logs may indicate that the
exception is external to the processor.

Action

Check system and operating system logs for exceptions. If no

exceptions are found, continue.

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

If the issue persists, see

Getting Help

CPU0703

Message

CPU bus initialization error detected.

LCD Message

CPU bus initialization error detected. Power cycle system.

Details

System event log and operating system logs may indicate that the
exception is external to the processor.

Action

Check system and operating system logs for exceptions. If no

exceptions are found, continue.

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

If the issue persists, see

Getting Help

CPU0704

Message

CPU <

number

> machine check error detected.

LCD Message

CPU <

number

> machine check error detected. Power cycle system.

Details

System event log and operating system logs may indicate that the
exception is external to the processor.

Action

Check system and operating system logs for exceptions. If no

exceptions are found, continue.

Turn off the system and remove input power for one minute.

Ensure the processor is seated correctly.

Reapply input power and turn on the system.

129

Summary of Contents for PowerEdge R820
















































































































































Search results

Summary of Contents for PowerEdge R820

Reviews:

Related manuals for PowerEdge R820

Brands by name

Popular brands

Dell PowerEdge R820, Owner'S Manual

Search results

Summary of Contents for PowerEdge R820

Reviews:

Related manuals for PowerEdge R820

Brands by name

Popular brands