90
|
Installing System Components
Figure 3-16. Replacing the System Battery
1
system battery
2
positive side of battery
connector
3
retention clip
4
negative side of battery
connector
3
Locate the battery location. See “System Board Connectors” on page
147.
CAUTION: To avoid damage to the battery connector, you must firmly support the
connector while installing or removing a battery.
4
Gently pull the retention clip over the battery towards the positive side
of the connector and lift the battery out of the connector. See Figure 3-
16.
5
Hold the new battery with the “+” facing the retention clip on the
battery connector. See Figure 3-16.
6
Gently pull the retention clip towards the positive side of the
connector and slide the battery into the connector until the retention
clip snaps into place. See Figure 3-16.
