manualshive.com logo in svg

Dell PowerEdge C6105, Hardware Owner'S Manual, Page: 11 / 166

Share
Download
Dell PowerEdge C6105 Hardware Owner'S Manual Download Page 11

1 

About Your System | 

11

 

 
 

About Your System 

Accessing System Features During Startup 

The following keystrokes provide access to system features during startup. 

Keystroke 

Description 

<F2> 

Enters the System Setup program. See “Start Menu” on 
page 30. 

<F11> 

Enters the BIOS Boot Manager. See “System Setup 
Options at Boot” on page 31. 

<F12> 

Starts Preboot eXecution Environment (PXE) boot. 

<Ctrl><C> 

Enters the SAS 2008 Daughter Card Configuration 
Utility. For more information, see the SAS adapter 
documentation. 

<Ctrl><H> 

Enters the LSI 9260 configuration utility. For more 
information, see the documentation for your SAS RAID 
card. 

<Ctrl><S> 

Enters the utility to configure NIC settings for PXE 
boot. For more information, see the documentation for 
your integrated NIC. 

<Ctrl><HOME>  BIOS recovery during Boot Block. 

Summary of Contents for PowerEdge C6105







































































































































































Reviews:

No comments