80
|
Installing System Components
Installing the Expansion-Card Connector
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1
Place the expansion-card connector into the expansion-card bracket.
See Figure 3-11.
2
Replace the two screws securing the expansion-card connector to the
expansion-card bracket. See Figure 3-11.
3
Install the expansion card. See "Installing the Expansion Card" on page
77.
4
Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 69.
5
Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Daughter Card
Removing the SAS Daughter Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1
Turn off the system, including any attached peripherals, and
disconnect the system from its electrical outlet.
2
Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 68.
