Dell PowerEdge C6100 Hardware Owner'S Manual Download Page 38

Page: 38 / 160

Using the System Setup Program

AMIBIOS Settings

Processor Settings

System Memory Settings

Option

Description

Version

Displays the BIOS version. Check this version number when
updating BIOS from the manufacturer.

Build Date

Displays the date the BIOS was created.

Displays the BIOS ID.

Option

Description

Type

Displays the type of processor installed on the system board.

Speed

Displays the maximum speed of the processor.

Count

Displays the number of installed processors.

Option

Description

Size

Displays how much memory (DRAM) is installed on the system
board.

System Time

Scroll to this item to adjust the time.

System Date

Scroll to this item to adjust the date.

book.book Page 38 Thursday, March 4, 2010 4:38 PM

Summary of Contents for PowerEdge C6100

































































































































































Search results

Summary of Contents for PowerEdge C6100

Reviews:

Related manuals for PowerEdge C6100

Brands by name

Popular brands

Dell PowerEdge C6100, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge C6100

Reviews:

Related manuals for PowerEdge C6100

Brands by name

Popular brands