Dell PowerEdge 6600 Installation And Troubleshooting Manual Download

Page: 22 / 77

E0780

MISSING CPU 1

Microprocessor is not installed in socket 1.

Install a microprocessor in socket 1 (see "

Adding or Replacing a

Microprocessor

" in "Installing System Options"). To identify microprocessor

socket 1, see

Figure A

-4

E07F0

CPU IERR

Faulty or improperly installed microprocessor,
microprocessor board, or I/O board.

See "

Troubleshooting the Microprocessor Board

" and "

Troubleshooting the I/O

Board

" in "Troubleshooting Your System."

E07F1

TEMP CPU

HOT

Specified microprocessor is out of acceptable
temperature range and has halted operation.

See "

Troubleshooting System Cooling

" in "Troubleshooting Your System." If the

problem persists, ensure that the microprocessor heat sinks are properly
installed (see "

Adding or Replacing a Microprocessor

" in "Installing System

Options").

E07F4

POST CACHE

Faulty or improperly installed microprocessor or
microprocessor board.

See "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E07F4

POST CPU REG

E07F4

POST CPU SMI

SMI handler failed to initialize; faulty or
improperly installed I/O riser card, I/O board, or
microprocessor board.

See "

Troubleshooting the I/O Riser Card

," "

Troubleshooting the I/O Board

and "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E07FA

TEMP CPU

THERM

Specified microprocessor is out of acceptable
temperature range and is operating at a
reduced speed, or frequency.

See "

Troubleshooting System Cooling

" in "Troubleshooting Your System." If the

problem persists, ensure that the microprocessor heat sinks are properly
installed (see "

Adding or Replacing a Microprocessor

" in "Installing System

Options").

E0876

POWER PS

No power is available from the specified power
supply; specified power supply is improperly
installed or faulty.

See "

Troubleshooting Power Supplies

" in "Troubleshooting Your System."

E0880

INSUFFICIENT

POWER PS

Insufficient power is being supplied to the
system; power supplies are improperly
installed, faulty, or missing.

See "

Troubleshooting Power Supplies

" in "Troubleshooting Your System."

E08F4

AC LINE

No power available through the specified
power cord.

Ensure that all power cords are securely connected. See "

External

Connections

" in "Troubleshooting Your System."

E0CB2

MEM MIRROR

Uncorrectable memory error was remapped to
the mirrored memory bank.

See "

Troubleshooting System Memory

" in "Troubleshooting Your System."

E0CB2

MEM SPARE ROW

Correctable errors threshold was met in a
memory bank, and errors are remapped to the
spare row.

E0CF1

MBE DIMM Bank

Memory modules installed in the specified bank
are not the same type and size; faulty memory
module(s).

Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "

Troubleshooting

System Memory

" in "Troubleshooting Your System."

E0CF1

POST MEM 64K

Parity failure in the first 64 KB of main memory.

See "

Troubleshooting System Memory

" in "Troubleshooting Your System."

E0CF1

POST NO MEMORY

Main-memory refresh verification failure.

Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "

Troubleshooting

System Memory

" in "Troubleshooting Your System."

E0CF5

LOG DISABLE

SBE

Multiple single-bit errors on a single memory
module.

See "

Troubleshooting System Memory

" in "Troubleshooting Your System."

E0D76

DRIVE FAIL

Faulty or improperly installed hard drive or RAID
controller.

See "

Troubleshooting Hard Drives

" and "

Troubleshooting a RAID Controller

Card

" in "Troubleshooting Your System."

E0F04

POST CMOS

CMOS write/read failure; faulty or improperly
installed I/O riser card, I/O board, or
microprocessor board.

See "

Troubleshooting the I/O Riser Card

," "

Troubleshooting the I/O Board

and "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E0F04

POST CPU SPEED

Microprocessor speed control sequence failure. See "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E0F04

POST DMA INIT

DMA initialization failure; DMA page register
write/read failure.

See "

Troubleshooting System Memory

" and "

Troubleshooting the I/O Board

" in

"Troubleshooting Your System."

E0F04

POST DMA REG

Faulty I/O board.

See "

Troubleshooting the I/O Board

" in "Troubleshooting Your System."

E0F04

POST KYB CNTRL

Faulty keyboard controller; faulty I/O riser card. See "

Troubleshooting the I/O Riser Card

" in "Troubleshooting Your System."

E0F04

POST MEM RFSH

Main-memory refresh verification failure.

See "

Troubleshooting System Memory

" in "Troubleshooting Your System."

E0F04

POST PIC REG

Master or slave PIC register test failure.

See "

Troubleshooting the I/O Board

" in "Troubleshooting Your System."

E0F04

POST SHADOW

BIOS shadowing failure.

See "

Troubleshooting the I/O Board

" and "

Troubleshooting System Memory

" in

"Troubleshooting Your System."

E0F04

POST SHD TEST

Shutdown test failure.

E0F04

POST SIO

Super I/O chip failure; faulty I/O riser card.

See "

Troubleshooting the I/O Riser Card

" in "Troubleshooting Your System."

E0F04

POST TIMER

Programmable interval timer test failure; faulty
I/O board.

See "

Troubleshooting the I/O Board

" in "Troubleshooting Your System."

E0F0B

POST ROM

CHKSUM

Faulty or improperly installed expansion card.

See "

Troubleshooting Expansion Cards

" in "Troubleshooting Your System."

E0F0C

VID MATCH CPU

Specified microprocessor is faulty, unsupported,
improperly installed, or missing.

See "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E10F3

LOG DISABLE

BIOS

BIOS disabled logging errors.

Check the SEL for details on the errors.

E13F2

IO CHANNEL

CHECK

Faulty or improperly installed expansion card or
I/O board.

See "

Troubleshooting Expansion Cards

" and "

Troubleshooting the I/O Board

" in

"Troubleshooting Your System."

E13F4

PCI PARITY

E13F5

PCI SYSTEM

E13F8

CPU BUS INIT

Faulty or improperly installed microprocessor,
microprocessor board, or I/O board.

See "

Troubleshooting the I/O Board

" and "

Troubleshooting the Microprocessor

Board

" in "Troubleshooting Your System."

E13F8

CPU BUS PARITY

Faulty microprocessor board.

See "

Troubleshooting the Microprocessor Board

" in "Troubleshooting Your

System."

E13F8

CPU MCKERR

Machine check error; faulty or improperly
installed microprocessor or microprocessor

Summary of Contents for PowerEdge 6600














































































Search results

Summary of Contents for PowerEdge 6600

Reviews:

Related manuals for PowerEdge 6600

Brands by name

Popular brands

Dell PowerEdge 6600, Installation And Troubleshooting Manual

Search results

Summary of Contents for PowerEdge 6600

Reviews:

Related manuals for PowerEdge 6600

Brands by name

Popular brands