manualshive.com logo in svg

Dell PowerEdge 5/E, User Manual

Share
Download
Dell PowerEdge 5/E User Manual Download Page 36

34

Hardware Installation and Configuration

5

Align the PERC 5/i Adapter to the PCI-E

 

slot you have selected.

6

Insert the adapter gently but firmly until the board is firmly seated in the PCI-E slot. See Figure 3-8.

 

CAUTION: 

Do not apply pressure to the memory module while inserting the controller into the PCI-E slot. 

Applying pressure could break the memory module or damage the DIMM connector.

 

CAUTION: 

Electrostatic discharge can damage sensitive components. Always use proper antistatic 

protection when handling components. Touching components without using a proper ground can damage 
the equipment. 

Figure 3-8.

Installing the PERC 5/i Adapter

7

Tighten the bracket screw, if any, or use the system’s retention clips to secure the controller to the 
system’s chassis. 

8

Connect the cables from the backplane of the system to the controller. See Figure 3-9.

filler bracket

PERC 5/i Adapter

PCI-E slot

bracket screw

Dell_PERC5_UG.book  Page 34  Tuesday, February 13, 2007  6:02 PM

Summary of Contents for PowerEdge 5/E

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands