Dell PowerEdge 5/E, User Manual

Page: 33 / 112

Hardware Installation and Configuration
31
Figure 3-5. Removing the PERC 5/E Adapter
NOTE:
For more information on removing peripherals installed in the system’s PCI-E slots, see the
Hardware
Owner’s Manual that shipped with the system.
Removing the DIMM and Battery from a PERC 5/E Adapter
NOTE:
The TBBU on the PERC 5/E Adapter consists of a DIMM and battery backup unit.
This section describes how to remove the TBBU from a PERC 5/E Adapter that is currently installed in
a system.
1
Perform a controlled shutdown on the system in which the PERC 5/E Adapter is installed, as well as
any attached storage enclosures, and remove the PERC 5/E Adapter from the system by following the
instructions detailed in "Removing the PERC 5/E Adapter" on page 30.
2
Visually inspect the controller and determine whether the dirty cache LED on the DIMM is
illuminated. See Figure 3-6. If the LED is illuminated, reinsert the controller into the system, replace
the system cover, reconnect the system to power, turn the system on and repeat step 1.
PERC 5/E Adapter
battery
bracket screw
memory module
Dell_PERC5_UG.book Page 31 Tuesday, February 13, 2007 6:02 PM