Dell OptiPlex 320 DCNE User Manual Download

Page: 7 / 176

Finding Information: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/findinfo.htm[5/22/2015 10:43:02 AM]

NOTE:

This document is available as a PDF at

support.dell.com

Warranty information

Terms and Conditions (U.S. only)

Safety instructions

Regulatory information

Ergonomics information

End User License Agreement

Dell™ Product Information Guide

Service Tag and Express Service Code

Microsoft Windows License Label

Service Tag and Microsoft® Windows®

License

These labels are located on your computer.

Use the Service Tag (see mini tower

Front

View

or desktop

Front View

) to identify your

computer when you use

support.dell.com

or contact support.

Enter the Express Service Code to direct

your call when contacting support.

Solutions — Troubleshooting hints and tips, articles from

technicians, and online courses, frequently asked questions

Community — Online discussion with other Dell customers

Upgrades — Upgrade information for components, such as

memory, the hard drive, and the operating system

Customer Care — Contact information, service call and order

status, warranty, and repair information

Service and support — Service call status and support history,

service contract, online discussions with technical support

Reference — Computer documentation, details on my computer

configuration, product specifications, and white papers

Downloads — Certified drivers, patches, and software updates

Desktop System Software (DSS)— If you reinstall the operating

system for your computer, you should also reinstall the DSS

utility. DSS provides critical updates for your operating system

and support for Dell™ 3.5-inch USB floppy drives, Intel®

processors, optical drives, and USB devices. DSS is necessary

for correct operation of your Dell computer. The software

automatically detects your computer and operating system and

installs the updates appropriate for your configuration.

Dell Support Website — support.dell.com

NOTE:

Select your region or business segment to

view the appropriate support site.

To download Desktop System Software:

Summary of Contents for OptiPlex 320 DCNE

















































































































































































Search results

Summary of Contents for OptiPlex 320 DCNE

Reviews:

Related manuals for OptiPlex 320 DCNE

Brands by name

Popular brands

Dell OptiPlex 320 DCNE, User Manual

Search results

Summary of Contents for OptiPlex 320 DCNE

Reviews:

Related manuals for OptiPlex 320 DCNE

Brands by name

Popular brands