Dell OptiPlex 320 DCNE User Manual Download

Page: 22 / 176

Advanced Features: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/advfeat.htm[5/22/2015 10:43:10 AM]

4. Press <Ctrl><Enter> to disable the existing system password.

5. Confirm that

Not Set

is displayed for the

System Password

option.

Not Set

is displayed, the system password is deleted. If

Not Set

is not displayed, press <Alt><b> to restart the

computer, and then repeat

step 3

through

step 5

To assign a new password, follow the procedure in

Assigning a System Password

6. Exit system setup.

Administrator Password

Option Settings

You cannot change or enter a new administrator password if either of the following two options is displayed:

Set

— An administrator password is assigned.

Disabled —

The administrator password is disabled by a jumper setting on the system board.

You can only assign an administrator password when the following option is displayed:

Not Set

— No administrator password is assigned and the password jumper on the system board is in the enabled

position (the default setting).

Assigning an Administrator Password

The administrator

password

can be the same as the system password.

NOTE:

If the two passwords are different, the administrator password can be used as an alternate system password.

However, the system password cannot be used in place of the administrator password.

1. Enter system setup and verify that

Admin Password

is set to

Not Set

(see

Entering System Setup

2. Highlight

Admin Password

and press the left- or right-arrow key.

The computer prompts you to type and verify the password. If a character is not permitted, the computer emits a

beep.

3. Type and then verify the password.

After you verify the password, the

Admin Password

setting changes to

Set

. The next time you enter system setup

(see

Entering System Setup

), the computer prompts you for the administrator password.

4. Exit system setup.

A change to

Admin Password

becomes effective immediately (no need to restart the computer).

Operating Your Computer With an Administrator Password Enabled

When you enter system setup, the

Admin Password

option is highlighted, prompting you to type the password (see

System

Setup

Summary of Contents for OptiPlex 320 DCNE

















































































































































































Search results

Summary of Contents for OptiPlex 320 DCNE

Reviews:

Related manuals for OptiPlex 320 DCNE

Brands by name

Popular brands

Dell OptiPlex 320 DCNE, User Manual

Search results

Summary of Contents for OptiPlex 320 DCNE

Reviews:

Related manuals for OptiPlex 320 DCNE

Brands by name

Popular brands